Skip to content

Working with Your Running EPLAN

On this page

Working with your running EPLAN is part of the EPLAN integration in the Pro+ and Enterprise plans. While you work in EPLAN yourself, Studio can connect to that EPLAN window, open pages and select devices there, read which pages you selected and run a few EPLAN actions. To connect and run the EPLAN actions, Studio needs no EPLAN licence of its own; to show pages and devices there and to follow your selection, Studio also opens the project in its own EPLAN.

Prerequisites

  • EPLAN Electric P8 2025 or 2026 installed on the same computer.
  • A Pro+ or Enterprise license.
  • EPLAN must allow access for Studio. Either turn it on once in EPLAN under File > Settings > Workstation > Interfaces > Remote access (allow remote access via the Remote Client), or let Studio start EPLAN for you (see below).

Connect to Your Running EPLAN

  1. Open the EPLAN sidebar. Without an open project, the Project Explorer offers Use My Running EPLAN. You find the same command in the ... menu of the Project Explorer under Running EPLAN > Connect to Running EPLAN....
  2. When one EPLAN is running, Studio connects to it at once. When several are running, pick one from the list; it shows the version, the process and the path of each.
  3. When no EPLAN allows access, Studio says so and offers Start EPLAN for Studio....

The status bar now shows EPLAN with the version and the project open there, for example "EPLAN 2026.0.3: Plant". Hover over it to see whether Studio uses an EPLAN of its own; click it for Show EPLAN Selection, Run EPLAN Action... and Disconnect from Running EPLAN.

Start EPLAN for Studio

Running EPLAN > Start EPLAN for Studio... lists the EPLAN versions installed on the computer. Pick one: Studio starts it in a new window with access for Studio and connects to it. Starting can take a few minutes. When EPLAN shows a dialog while it starts, for example to choose a licence, answer it there; Studio waits up to three minutes. The new EPLAN uses an EPLAN licence like any EPLAN you start yourself.

Without a Second EPLAN Licence

When you connect without an open project in Studio, Studio uses no EPLAN licence of its own. The Project Explorer then shows "Studio is connected to your running EPLAN." The EPLAN actions work. To browse and edit the project in Studio, to show pages and devices in your EPLAN and to follow its selection, Studio needs its own EPLAN with the project open.

Choose Open Project in Studio to open the project of your EPLAN in Studio. Studio asks first, because its own EPLAN needs an EPLAN licence; afterwards it connects to your EPLAN again.

Show in EPLAN

Show in EPLAN opens a page in your EPLAN and selects the device on it:

  • Project Explorer: right-click a page, a device, a function, a search hit, a terminal strip or a cable and choose Show in EPLAN.
  • Page preview: select objects on the page and choose Show in EPLAN in the title bar. Your EPLAN opens the page and selects the same objects.
  • TIA Portal tags and modules: right-click a tag, a module or a device in the TIA Portal project and choose Show in EPLAN. When the signal is on several pages, pick the page.
  • Tag comparison and hardware comparison: the Show in EPLAN button next to a signal, a station or a module.

When your EPLAN has another project open, Studio asks "Open ... in EPLAN?". Choose Open in EPLAN to switch, or cancel to leave your EPLAN as it is. Show in EPLAN appears only while Studio is connected to your EPLAN.

Show in EPLAN answers right away, also while Studio exports a large project. Only for TIA Portal tags and modules does Studio first look the page up in the EPLAN project open in Studio, so there it waits until a running export has finished. While it waits, a notification names the running task, and Cancel stops the lookup.

Show EPLAN Selection

Select pages in the page navigator of your EPLAN, then choose Running EPLAN > Show EPLAN Selection (or click the status bar entry). Studio selects the same pages in the Project Explorer and opens the first one in the page preview. EPLAN tells Studio only which pages are selected, not which devices.

When Studio has another project open, it tells you which project your EPLAN has open and offers Open Project in Studio.

Run EPLAN Actions

Running EPLAN > Run EPLAN Action... offers four actions that run in your EPLAN:

Action What it does
Redraw Redraws the open page.
Search Device Tag Asks for a device tag, for example -K1, and lists it in the search results of EPLAN.
Update Reports Updates all reports of the project.
Check Project Checks the project with the check scheme you used last.

Update Reports and Check Project change the project in your EPLAN, so Studio asks first. Use Undo in EPLAN to revert them; Discard AI Changes in Studio does not cover them. When the AI assistant has changes in the same project that you have not kept or discarded yet, choose Keep AI Changes or Discard AI Changes first: Studio runs the two actions only then, because after a change in EPLAN the AI changes can no longer be discarded.

Automatic Refresh

While Studio is connected and has the same project open, it notices changes you make in EPLAN and refreshes the Project Explorer, the page preview and the other EPLAN views. When the AI assistant has changes in this project that you have not kept or discarded yet, Studio shows "The project was changed in EPLAN." with Refresh instead, so you decide when to reload.

You can turn this off or change how often Studio checks under Settings > EPLAN (refresh Studio when the project changes in your running EPLAN, and the check interval in seconds).

When the Connection Ends

When you close your EPLAN, the status bar entry disappears and Studio shows "The connection to your running EPLAN ended." with Reconnect. Disconnect from Running EPLAN ends the connection yourself; your EPLAN keeps running.

When your EPLAN shows a dialog, it cannot answer Studio. Studio then reports "Your EPLAN did not answer. Close open dialogs in EPLAN and try again."

Language, Licence File and User of Studio's EPLAN

Under Settings > EPLAN you can choose how Studio starts its own EPLAN:

  • Language of the EPLAN messages: the language EPLAN is set up with, or one of the EPLAN languages. Choose a language only when it is installed with your EPLAN; otherwise the EPLAN messages stay empty.
  • Licence file: an EPLAN licence file (.lis), for example a borrowed licence. Leave it empty to use the licence EPLAN finds itself.
  • User: your EPLAN user for the EPLAN rights management. Studio asks for the password when it starts EPLAN and keeps it only until you close the window. Running EPLAN > Forget EPLAN Password makes Studio ask again.

The settings take effect the next time Studio starts EPLAN. Start EPLAN for Studio... uses the same licence file and user.

With the AI Assistant

The AI assistant can connect to your running EPLAN, show pages and devices there, read the pages you selected and run the four EPLAN actions. It asks before it connects, starts an EPLAN or runs an action, and it never switches the project your EPLAN has open. It cannot look at the page in your own EPLAN window as an image. For it to see that page and draw on it, open the project in Studio with Open Project in Studio and open the page there.